Wednesday, November 23, 2011

Best Bushnell Telescope Camera T-Adapter 1.25 inch


Price : $31.95
BUY NOW
Bushnell Telescope Camera T-Adapter 1.25 inch - Connect your 35mm SLR Camera to any reflector or refractor telescope with a 1 1/4" accessory mount using this camera adapter. Turn your scope into a long lens for some real exciting close-ups! A T-Mount is required to connect your camera to this adapter

This review is from : Bushnell Telescope Camera T-Adapter 1.25 inch
Bang for the buck but you got to wait a little . Product works grate with my Rebel XTi cam. Good pricing but I waited for a week and half as I opted for the Free shipping. It perfectly fits my Telescope. This is durable and I recommend this to any one who required it.
Bushnell Telescope Camera T-Adapter 1.25 inch Reviews
Definitely adapts but definitely doesn't work for ANY telescope . UPDATED 1/8/2012This item is very well constructed and fits perfectly in every way possible. The issue is that since it's so long, it threw off my optics to the point that I could not focus. This was only a problem when I used my telescope's traditional eyepiece port. Using my telescope's rear camera port, and with some dis-assembly of the tube and T-ring, it did end up working out. Not all telescopes have a rear port.Telescope was Meade ETX-80.
Bushnell Telescope Camera T-Adapter 1.25 inch Opinions
Good Product - Few Things to Note . Bushnell adapter for 1.25 Inch digiscoping:The adapter is sturdy and has provision to insert any 1.25" eyepiece before mounting in to the T-RING. This product is nice and has adjustment facility for holding the eyepice inserted as well as adjusting the length if not getting focusPros:
-> U can insert any eyepiece in to it and then attach the adpter to the camera(tRING)
-> U can unscrew the bottom part and use it directly with the telescope if you dont wanna attach any eyepieces
-> The 1.25" hose is pretty fitting tight. Hence care has to be there while handlingCons:
-> The screw in the tube makes it difficult when it comes to thread with the camera adapters. The screw will not allow you to thread this to full tight thereby allowing chances of making this to lose focus
-> YOU HAVE TO TAKE OUT THE RUBBER SHEATH OF ANY 1.25" EYEPIECE BEFORE INSERTING IN TO THIS ADAPTER. Otherwise, the eyepieces wont fit in.Overall, this is a nice adapter with cheaper price when compared to the native brand ones which dont have the provision to add additional eyepieces. The adapter is bit heavy and should be carefully handled avoiding any overweights to the telescope.
I see stars . With this adapter and a few other pieces of equipment we're able to get photos of heavenly bodies, and I mean the ones in the sky.
Does not work on all scopes . It is a well built unit and is of very good quality. the reason for 4 stars is that it was too long for my 80mm refractor, but it worked fine on the 90mm mak. on the refractor it was right at the edge of focus, almost but no play after that. Unfortunatly the 80mm is the one I bought it for. I'm keeping it because it will be handy later.
Works great--you can shorten the length too... . Works great, at first I couldn't reach focus with my dslr (tube was too long), but all I did was simply unscrew each end of the adapter, remove the extension tube, and then screw the two ends back together without the extension. I am now able to reach focus. FYI, you may need needle-nose pliers to get the camera side t-mount threads off of the tube, but they'll for sure come off.


Product Details

EAN : 0029757780140
UPC : 029757780140
MPN : 780104
Brand : Bushnell
Weight : 1 pounds
Height : 2 inches
Length : 5 inches
Width : 2 inches
Binding : Electronics
Manufacturer : Bushnell
Model : 780104
Publisher : Bushnell
SKU : BUS-78-0104
Studio : Bushnell

Similar Products


Where To Buy


You can buy Bushnell Telescope Camera T-Adapter 1.25 inch on Amazon . Click here to Read More